Installation of the VPhase VX1 must be undertaken by a competent and qualified electrician. Extreme care must be taken when working with any electrical equipment.

ENSURE THE POWER SUPPLY TO THE VPHASE VX1 IS ISOLATED BEFORE REMOVING THE COVER

This installation guide does not replace the full installation instructions. Please read the full installation instructions before undertaking installation of the VPhase VX1.

	STEP 1 Survey the premises. The VPhase device is designed to sit above or alongside the consumer unit, therefore, access to and room for the unit needs to be assessed. The suitability of the consumer’s fuse board also needs to be checked, as some early style distribution boards will not be suitable e.g. Wylex Re-Wireable style boards.
	STEP 2 Check the electrical supply and verify the exact use of all circuits. Decide which circuits should be supplied by VPhase.
	STEP 3 Locate the VPhase unit on a suitable surface and secure adequately.
	STEP 4 Install the supply cabling from the distribution board to the VPhase unit and then the return supply back to the distribution board from the VPhase unit.
	STEP 5 Re-configure the protective devices for VPhase and non-VPhase supply. Reconnect all circuit conductors taking care that neutral conductors are connected to the appropriate neutral terminal bars.
	STEP 6 When applicable circuits have been reconfigured then essential ‘dead’ testing can be carried out.
	STEP 7 Once the ‘dead’ testing is complete then the VPhase supply is to be energised. When switched on, the unit will carry out a self-test, which is indicated by a permanent green light and a red light, which flashes on and off for a short duration.
	STEP 8 Carry out a voltage check to satisfy the VPhase unit is optimising your voltage supply to 220 volts. You can now complete your test and inspection.
	The installation is now complete!

Download Installation Guide here

 

QUALIFIED ELECTRICIANS ONLY

VPhase is offering qualified electricians the chance to learn and earn with FREE voltage optimisation training workshops across the UK.

For only two – three hours of your time you will learn how to maximize your earning potential AND save your customers energy and money.

For a list of locations and dates click here
[Opens in a new window].

To register your interest please click here. An email will be sent to confirm your registration.

 

Please call if you would like us to send you printed consumer brochures for your customers.

• VPhase Consumer Brochure
• VPhase Trade Brochure
• VPhase Consumer FAQ's
• VPhase Technical FAQ's
• VPhase Technical Specification
• Installation Instructions
• VPhase Embedded Generation
• Changing the VPhase output voltage